Zyxel WAC6103D-I 802.11ac 3×3 Dual Optimized Antenna AP (no PSU)

  • Záruka: 24 mesiacov
  • Stav: nové
  • Momentálne vypredané
    Termín naskladnenia je neznámy

    Je nám ľúto, ale daný produkt je momentálne vypredaný. Ak si želáte byť informovaný o jeho naskladnení, zadajte Váš e-mail.

    Katalógové číslo: NTW-ZY-WAC6103D-I
    Kategórie: AP / controllery, AP, Controllery,
    Značka:

    Standalone or Controller 802.11ac, 3x3 Dual band & Dual radio (1750Mbps) Wireless Access Point, Dual optimized antenna for flexible usage as Ceiling/Wall mount, 1GbE LAN + 1GbE Uplink ports, PoE, no PSU, Slim and slick design

    PŘEHLED

    Ultra-fast, Ultra-slim 802.11ac Wi-Fi Access Point Featuring Innovative Dual-Optimized Antenna Technology

    To Wi-Fi users, it is not uncommon to have bad experience on Wi-Fi performance, and antenna design plays an important role while evaluating wireless performance. Today, most access points on the market are designed with single static radiation pattern, typically for ceiling-mount. When an AP with ceiling-mount pattern is installed in wall-mount scenario, its signal coverage does not fit for wall-mount deployment. Adapting an AP with external antenna may be the alternative option, however, external antenna installation requires know-how for antenna selection, and would look awkward for interior decoration. A flexibly installed Wi-Fi AP with optimal performance and stylish outlook is a prerequisite today, but a satisfactory solution has been missing for a long time.

    ZyXEL’s WAC6103D-I is a high performance 3-stream 802.11ac Wi-Fi AP featuring ultra-fast speeds of up to 1.75 Gbps with ground-breaking “dualoptimized” antenna design. Via the innovative adjustable antenna setting, the WAC6103D-I provides the best signal coverage fitting for either ceiling-mount or wall-mount deployments. Even better, the stylish, ultra-slim industrial design perfectly blends into modern decorations. Choose WAC6103D-I for constant, no-compromise Wi-Fi performance.

    TECHNICKÁ SPECIFIKACE

    Model

    WAC6103D-I

    Product name

    802.11ac Dual Radio Dual-optimized Antenna 3x3 Access Point

    Main Design
    Wireless frequency

    2.4 and 5 GHz

    Radio

    2

    RF Specifications
    Frequency band

    2.4 GHz (IEEE 802.11 b/g/n)
    5 GHz (IEEE 802.11 a/n/ac)

    802.11n/ac premium features

    3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
    Maximal Ratio Combining (MRC)
    20-, 40- and 80-MHz channels
    Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
    Cyclic Delay diversity (CSD) support
    Maximum Likehood Demodulation (MLD) support
    Low Density Parity Check (LDPC) support

    Conducted typical transmit output power (dBm)
    FCC 11g/n

    26

    FCC 11a

    27

    FCC 11n/a (ac)

    27

    EU 11b/g

    18

    EU 11g/n

    18

    EU 11a

    22

    EU 11n/a (ac)

    24

    Antenna system

    Dual-optimized internal antenna

    Antenna gain

    Ceiling: 2.4 GHz 3 dBi; 5 GHz 4 dBi
    Wall: 2.4 GHz 4 dBi; 5 GHz 5 dBi

    Support data rate

    802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
    802.11n: up to 450 Mbps in MCS15 (40 MHz)
    802.11ac: up to 1300 Mbps in MCS9 (80 MHz)

    Receive sensitivity

    Min. Rx sensitivity to -102 dBm

    Interfaces
    Number of 10/100/1000M LAN

    2 x switch ports

    Console port

    4-Pin serial

    PoE

    Yes

    PoE power draw

    12.48 W (802.3at PoE)*

    WLAN Features
    WLAN maximum throughput

    Up to 900 Mbps

    Mesh AP (By License)

    Yes

    Mesh AP for multiple SSID with VLAN (through tunnel mode)

    Yes

    Wireless Security
    WEP

    Yes

    WPA/WPA2-PSK

    Yes

    WPA/WPA2-Enterprise

    Yes

    WMM

    Yes

    WLAN access control list

    Yes

    EAP types

    EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM

    IEEE 802.1X

    Yes

    Number of SSID

    16

    Web authentication

    Yes

    MAC filtering

    Yes

    Layer-2 isolation

    Yes

    RADIUS authentication

    Yes

    Microsoft AD authentication

    Yes

    LDAP authentication

    Yes

    MAC authentication

    Yes

    Rogue AP detection

    Yes

    Rogue AP containment

    Yes

    Network
    IPv6 host

    Yes

    VLANs

    Yes

    DHCP client

    Yes

    QoS (PG)
    WMM

    Yes

    WMM power save

    Yes

    DiffServ marking

    Yes

    Management
    ZON Utility

    Discovery of ZyXEL switches, APs and gateways
    Centralized and batch configurations
    IP configuration
    IP renew
    Device factory reset
    Device reboot
    Device locating
    Web GUI access
    Firmware upgrad
    Password configuration
    One-click quick association with ZyXEL AP Configurator (ZAC)

    Smart Connect

    Discover neighboring devices
    One-click remote management access to the neighboring ZyXEL devices

    ZyXEL AP Configurator

    Batch AP configuration
    Batch AP firmware upgrade
    Batch AP profile backup

    ZyXEL Wireless Optimizer

    Wi-Fi AP planning
    Wi-Fi coverage detection
    Wireless health management

    Standalone AP mode

    Yes

    Managed AP mode

    Yes

    CLI

    Yes

    Web UI

    Yes

    SNMP

    v2c/v3

    Others
    Plenum rating

    Yes

    Input power

    802.3at PoE only (No DC jack)

    MTBF (hr)

    1,005,235

    Standard Compliance
    Ethernet

    IEEE 802.3
    IEEE 802.3u
    IEEE 802.11ab
    IEEE 802.3au
    IEEE 802.3az
    IEEE 802.3at

    PoE

    IEEE 802.3at

    WLAN

    802.11b: DBPSK, DQPSK, CCK
    802.11g: BPSK, QPSK, 16-QAM, 64-QAM
    802.11a: BPSK, QPSK, 16-QAM, 64-QAM
    802.11n: BPSK, QPSK, 16-QAM, 64-QAM
    802.11ac: BPSK, QPSK, 64-QAM, 256-QAM

    Certifications
    Radio

    FCC part 15C, FCC part 15E, ETSI EN 300 328, EN 301 893, LP0002

    EMC

    FCC part 15B, EN 301 489-1, EN 301 489-17, EN55022,
    EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438

    Safety

    EN 60950-1, IEC 60950-1, BSMI CNS14336-1

    Physical Specifications
    Item
    Dimensions (WxDxH) mm

    203.9 x 191.7 x 34.7

    Weight (g)

    445

    Included accessories

    Wall/ceiling mount plate

    Environmental Specifications

    Operating

    Temperature

    0 °C to 50 °C

    Humidity

    10% to 90% (non-condensing)
    Storage

    Temperature

    -40 °C to 70 °C

    Humidity

    10% to 90% (non-condensing)